Siemens SPS starter kit 6ED1057-3BA00-0AA8 12 Vdc, 24 Vdc 6ED1057-3BA00-0AA8 Scheda Tecnica
Codici prodotto
6ED1057-3BA00-0AA8
User interface
2.7 Toolbars
LOGO!Soft Comfort Online Help
36
Operating Instructions, 06/2014
Time control icons
If you have programmed a time-sensitive circuit, you can use the time control to monitor the
reaction of your circuit program.
Start simulation for a specific time or number of cycles.
Set the period and the number of cycles using the following icons.
Set the period and the number of cycles using the following icons.
Set the period and the time base for a time-limited simulation or set a specific number
of cycles
Display the current time in LOGO!Soft Comfort
Modify the current time in LOGO!Soft Comfort
Data Table icon
You can view VM (Variable Memory) values in a data table. For simulation, the values are
updated each cycle. For online test, the values are updated after each communication.
Status display
Prerequisite: You can enable the display of signal states and process variables with the
Tools → Options: Simulation (Page 121) command.
The colored indication identifies the "1" or "0" status of a connecting line. By default,
The colored indication identifies the "1" or "0" status of a connecting line. By default,
connection lines carrying a "1" signal are red while the lines carrying a "0" signal are blue.
Example for the FBD Editor:
Example for the FBD Editor:
PI controller trend view
If your circuit program includes one or more PI controller function blocks, the simulation
displays a trend view window of the analog output that shows the change in the AQ and PV
values relative to the SP parameter over time. The trend view is continually updated while
the simulation is in progress, at the frequency of the sample period that you configure. You