Buffalo LinkStation 441D 16TB LS441D1604-EU Scheda Tecnica
Codici prodotto
LS441D1604-EU
96
1
Click the
icon in the Dock to start NAS Navigator2.
2
Double-click the LinkStation icon or click the LinkStation icon while holding down the control key, then select
Open Folder. Enter a username and password with the rights to access the shared folder.
Open Folder. Enter a username and password with the rights to access the shared folder.
3
Select the shared folder to mount and click OK.
4
The shared folder is now mounted as a network drive.
Changing the IP Address
1
Click the
icon in the Dock to start NAS Navigator2.
2
Hold down the control key, select your LinkStation, and choose Configure - IP Address.
3
Uncheck "Use DHCP", enter the desired settings and the administrator password, then click Apply.
Note: The following IP addresses are reserved and should not be used. If you configure one of them by accident,