Buffalo LinkStation 441D 16TB LS441D1604-EU 数据表
![Buffalo](https://files.manualsbrain.com/attachments/9b1b53b017a12138833f39c4f8c1f2aa34c2c16e/common/fit/150/50/266e1b8b2619927602ffd298e5482e1aaec72f4e72045ee85919e6306019/brand_logo.png)
产品代码
LS441D1604-EU
96
1
Click the
icon in the Dock to start NAS Navigator2.
2
Double-click the LinkStation icon or click the LinkStation icon while holding down the control key, then select
Open Folder. Enter a username and password with the rights to access the shared folder.
Open Folder. Enter a username and password with the rights to access the shared folder.
3
Select the shared folder to mount and click OK.
4
The shared folder is now mounted as a network drive.
Changing the IP Address
1
Click the
icon in the Dock to start NAS Navigator2.
2
Hold down the control key, select your LinkStation, and choose Configure - IP Address.
3
Uncheck "Use DHCP", enter the desired settings and the administrator password, then click Apply.
Note: The following IP addresses are reserved and should not be used. If you configure one of them by accident,