Fujitsu ESPRIMO P7935 VFY:P7935PXD31IT Scheda Tecnica

 

Preparing for use 

A26361-K1006-Z220-1-7619, edition 2 

9 

► 

Follow the instructions contained in the monitor manual to prepare the monitor for operation 
(e.g. connecting cables). 

► 

Plug the data cable into the monitor port 

 of the device. 

 

The following illustrations may differ slightly from your device, depending on its 
configuration level.   

 

1

2

 

 

► 

Depending on your device configuration level, plug the monitor power cable into either the 
system unit (1) or a grounded mains outlet (2). 

 

 

The monitor power cable may only be connected to the device monitor socket if the 
monitor current consumption is less than 1.5 A for 230 V or 3 A for 115 V. The values for 
the monitor current consumption can be found in the technical data on the monitor or in the 
operating manual for the monitor. 

 

Depending on the equipment level selected, your device will be supplied with a USB mouse or a 
PS/2 mouse. 

► 

Connect the USB mouse to one of the USB ports 

 on the device. 

► 

Connect the PS/2 mouse to the PS/2 mouse port   of the device. 

 

 

If you do not attach a mouse at the PS/2 mouse port  , you can disable the mouse 
controller in the BIOS Setup in order to free the IRQ12 for a different application.