Fujitsu ESPRIMO P7935 VFY:P7935PXD31IT Scheda Tecnica

Preparing for use 

 

10 

A26361-K1006-Z220-1-7619, edition 2 

Depending on the equipment level selected, your device will be supplied with a USB keyboard or a 
PS/2 keyboard. 

Connecting a USB keyboard 
Use the supplied keyboard cable only. 
► 

Plug the rectangular connector of the keyboard cable into the rectangular socket on the 
underside of the keyboard. 

► 

Insert the flat rectangular USB plug of the keyboard cable into a USB port 

 of the device. 

Connecting a PS/2 keyboard 
Use the supplied keyboard cable only. 
► 

Plug the rectangular connector of the keyboard cable into the rectangular socket on the 
underside of the keyboard. 

► 

Plug the round plug of the keyboard cable into the keyboard port 

 on the device. 

If your device has parallel and serial ports, you can connect external devices to these ports (such as 
a printer or modem). 
► 

Connect the data cable to the external device. 

► 

Depending on the device, connect the data cable to the parallel port 

 or the serial port 

. 

For an exact description of how to connect external devices to the corresponding port, please see 
the external device documentation. 

 

You can change the port settings (e.g. address, interrupt) in the BIOS Setup (refer to the 
Mainboard manual or the "BIOS Setup" manual. 

 

 

The devices connected to the parallel or serial port require drivers. Your operating system 
already includes many drivers. If the required drive is missing, install it. Current drivers are 
usually available on the Internet or will be supplied on a data carrier.