Trekstor ® Surftab breeze 7.0 quad Android 17.8 cm (7 ") 8 GB WiFi Blue 1.3 GHz Quad Core 98621 Scheda Tecnica
Codici prodotto
98621
EN
21
Connecting another device via Bluetooth®
a) Select "s
ettings
" + "b
luetooth
" in the applications menu.
b) Slide the switch from "o" to "i".
c) Activate the Bluetooth function on the device you want to connect and
make the device visible to other Bluetooth devices, if necessary. To do so,
refer to the instructions in the operating manual of the device.
d) Tap "b
luetooth
". A list of all available Bluetooth devices in the vicinity
will appear.
e) Now tap the device you want to connect and confirm by tapping "p
aiR
".
f ) You may also have to confirm pairing on the device you want to connect.
17) Activating standby mode
If you do not want to use your SurfTab for a while, press the on/off switch briefly
to put the SurfTab into standby mode and save power. To exit standby mode,
briefly press the on/off switch again.
Once you have reactivated the SurfTab, it will initially display the lock screen.
Place your finger on the lock symbol and drag it to the right to the open lock.
Your SurfTab will now display the home screen.
i
If you previously set up a screen lock, you must now identify yourself using the
method that you chose in order to unlock the SurfTab.
i
Standby mode is activated automatically when the SurfTab is not used for
a certain time. You can specify the period of time after which the SurfTab
automatically goes into standby mode under "S
ettingS
"
+
"d
iSpLay
"
+
"S
Leep
".
18) Reset and recovery mode
Reset
The "recovery mode" allows you to reset the device to its factory settings and
The "recovery mode" allows you to reset the device to its factory settings and
delete the memory of the SurfTab.
Putting the SurfTab into recovery mode/loading the factory settings
The "recovery mode" allows you to reset the device to its factory settings, delete
Putting the SurfTab into recovery mode/loading the factory settings
The "recovery mode" allows you to reset the device to its factory settings, delete
forgotten passwords or delete the memory of the SurfTab, for instance.
a
As system-related settings can be specified in recovery mode, you should only use
this mode if you have the necessary technical knowledge.