Renkforce Rotary-Timer Digital Timer 3430 Scheda Tecnica

Codici prodotto

3430

Maintenance and cleaning

• Apart from occasional cleaning, the device is maintenance-free. Use a soft,

antistatic and lint-free cloth to clean the timer.

• Do not use any abrasive or chemical cleaning agents.
• Do not immerse the device in water.

Disposal

a) Product

Electronic devices are recyclable waste and must not be disposed of in the

household waste.
At the end of its service life, dispose of the product according to the

relevant statutory regulations.
Remove any inserted (rechargeable) batteries and dispose of them

separately from the product.

b) (Rechargeable) batteries

You as the end user are required by law (Battery Ordinance) to return all used batteries/

rechargeable batteries. Disposing of them in the household waste is prohibited.

Contaminated (rechargeable) batteries are labelled with this symbol to

indicate that disposal in the domestic waste is forbidden. The designations

for the heavy metals involved are: Cd = Cadmium, Hg = Mercury, Pb = Lead

(name on (rechargeable) batteries, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to collection points in your

municipality, our stores or wherever (rechargeable) batteries are sold.

You thus fulfil your statutory obligations and contribute to the protection of the

environment.

Technical data

Operating voltage................................1 x 1.5 V/DC battery, type AAA
Maximum countdown time ................99 min. and 50 sec.
Minimum adjustable interval.............10 seconds
Operating conditions ..........................0 to +40 °C, 95 % RH (non-condensing)
Storage conditions..............................-10 to +60 °C, 95 % RH (non-condensing)
Dimensions (Ø x H)..............................78 x 30 mm
Weight ...................................................85 g

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data

processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the

V1_0714_02-DS