Keba 86.875 Electric Cars KEBA 86.875 Electric Cars N/A Silver, Grey Silver, Grey 86.875 Scheda Tecnica

 KeContact 

P20 

42 

 manual, Version: 1.41 / Article no.: 90064 

 

© KEBA 2012-2013 

To allow the access of the vehicle to the home network or internet, the power line communi-
cation between vehicle and charging station must be configured on both sides with the same 
password (NMK „Network Membership Key“). 
 
The default password is „emobility“. It is recommended to change this password. 
 
The required software ("EV Communication Assistant“) including the instructions how to con-
figure the charging station, you can find in the download area under 

. 

 
Further details how to configure your vehicle, please see the manufacturer’s manual of your 
vehicle. 
 
 

 

The following fuse must be used: 
 

F1 

3.15 A / 250 V 

Slow-blow with high breaking 
capacity (>1500A) (T) (H) 

5 x 20 mm fuse 

 
 

 

Opening the fuse holder 

Switch off the mains supply line of the 
charging station completely. 

Remove the connector panel cover. 

Press a flathead screwdriver into the 
opening of the fuse holder. 

Turn the fuse holder counterclockwise 
until the spring pushes out automatically. 

Replace the fuse. 

Push the fuse holder in and retighten in 
the clockwise direction.