Nikon D5200 Kit + AF-S DX 18-55 VR II VBA350K007 Scheda Tecnica

40

Manual focus can be used when you are not using an AF-S or AF-I lens or when 
autofocus does not produce the desired results (

0 34).

If the lens is equipped with an A-M or M/A-M mode 
switch, slide the switch to M.

To focus manually, adjust the lens focus ring until the 
image displayed on the clear matte field in the viewfinder 
is in focus. Photographs can be taken at any time, even 
when the image is not in focus.

❚❚The Electronic Rangefinder

If the lens has a maximum aperture of f/5.6 or faster, the 
viewfinder focus indicator can be used to confirm whether the 
subject in the selected focus point is in focus (the focus point 
can be selected from any of the 39 focus points). After 
positioning the subject in the selected focus point, press the 
shutter-release button halfway and rotate the lens focus ring 
until the in-focus indicator (

I) is displayed. Note that with the subjects listed on 

page 34, the in-focus indicator may sometimes be displayed when the subject is not 
in focus; confirm focus in the viewfinder before shooting.