PASCO Specialty & Mfg. Pasport Carbon Dioxide Gas Sensor PS2110 Manuale Utente
Instruction Sheet
012-14330B
Carbon Dioxide Gas Sensor
PS-2110
.
*See the PASCO catalog or the PASCO web site at www.pasco.com
for more information.
for more information.
Introduction
The PS-2110 Carbon Dioxide Gas Sensor measures carbon
dioxide gas concentration in parts per million in gases such
as air. The sensor is designed only for educational purposes
and is not intended for environmental compliance studies.
dioxide gas concentration in parts per million in gases such
as air. The sensor is designed only for educational purposes
and is not intended for environmental compliance studies.
The sensor is designed to work with a PASPORT-compatible
interface (such as the PS-2100 USB Link) and PASCO data
acquisition software (such as PASCO Capstone) to measure
carbon dioxide gas concentration.
interface (such as the PS-2100 USB Link) and PASCO data
acquisition software (such as PASCO Capstone) to measure
carbon dioxide gas concentration.
The sensor includes a sensor extension cable, a 250 mL clear
plastic sampling bottle, and a stopper that fits over the sen-
sor’s probe.
plastic sampling bottle, and a stopper that fits over the sen-
sor’s probe.
Setup the Carbon Dioxide Gas Sensor
•
Plug the Carbon Dioxide Gas Sensor into a PASPORT
input port of a PASCO interface.
input port of a PASCO interface.
NOTE: If more distance is needed between the sensor and
the interface, plug the sensor into the included Extension
Cable, and then plug the cable into the interface.
the interface, plug the sensor into the included Extension
Cable, and then plug the cable into the interface.
Rubber
Stopper
Threaded
Hole
Calibration
Button
Sampling
Bottle
Sensor
Extension
Cable
Probe
Included Items
Sampling Bottle, Clear, 250 mL
Sensor Extension Cable (PS-2500)
Rubber Stopper
Required Items*
PASCO Interface
PASCO Data Acquisition Software
Sensor
Interface