PASCO Specialty & Mfg. Pasport Carbon Dioxide Gas Sensor PS2110 Manuale Utente

Pagina di 3
Model No.PS-2110
 Technical Support
3
Record data for about 10 minutes; this is the baseline 
reading before germination.
Disconnect the sensor from the interface and remove the 
probe from the sampling bottle.
Moisten the pea seeds with a few teaspoons of water. 
Place a dark cloth over the bottle and allow the peas to 
germinate overnight.
Reconnect the sensor and put the probe and stopper back 
into the neck of the bottle. Do not let the probe or sensor 
get wet.
Record data for about 10 minutes, and compare the car-
bon dioxide concentration after germination to the con-
centration before germination. 
Try the experiment with germinated pea seeds at differ-
ent temperatures.
Other Activities
Plant Respiration versus Photosynthesis
Cellular Respiration
Animal Respiration
Air Quality Evaluations
Sublimation of Solid CO
2
 (dry ice)
Rate of CO2 Generation in Chemical Reactions
Decomposition Rate of Organic Materials in Soils
Measurement of Carbon Dioxide Concentration from 
Various Sources
More Information
For the latest information about the Carbon Dioxide Gas 
Sensor, visit the PASCO web site at www.pasco.com and 
enter “PS-2110” in the Search window.
Specifications
Technical Support
For assistance with any PASCO product, contact PASCO at:
Limited Warranty For a description of the product warranty, see the 
PASCO catalog. Copyright The PASCO scientific Instruction Sheet 
is copyrighted with all rights reserved. Permission is granted to 
non-profit educational institutions for reproduction of any part of this 
manual, providing the reproductions are used only in their laborato-
ries and classrooms, and are not sold for profit. Reproduction under 
any other circumstances, without the written consent of PASCO sci-
entific, is prohibited. Trademarks PASCO, PASCO Capstone, 
PASPORT, SPARK Science Learning System, SPARK SLS, and 
SPARKvue are trademarks or registered trademarks of PASCO sci-
entific, in the United States and/or in other countries. For more infor-
mation visit www.pasco.com/legal. 
Product End of Life Disposal Instructions:
This electronic product is subject to disposal and recycling 
regulations that vary by country and region. It is your 
responsibility to recycle your electronic equipment per your 
local environmental laws and regulations to ensure that it 
will be recycled in a manner that protects human health and 
the environment. To find out where you can drop off your 
waste equipment for recycling, please contact your local 
waste recycle/disposal service, or the place where you pur-
chased the product.
The European Union WEEE (Waste Elec-
tronic and Electrical Equipment) symbol 
(to the right) and on the product or its 
packaging indicates that this product must 
not be disposed of in a standard waste con-
tainer.
Item
Value
Range:
±0 to 300,000 ppm
Accuracy:
0 to 50,000 ppm: 100 ppm or 
10% of value, whichever is 
greater
10,000 to 50,000 ppm: 20% 
of value
Over 50,000 ppm: qualitative 
only
Resolution
1 ppm
Operating Temperature
+20° to +30°C
Relative Humidity
5 to 95% non-condensing
Repeatability
±50 ppm or 5% of value, 
whichever is greater
Address: PASCO scientific
10101 Foothills Blvd.
Roseville, CA 95747-7100
Phone:
+1 916-462-8384 (worldwide)
877-373-0300 (U.S.)
E-mail:
support@pasco.com
Web
www.pasco.com