Henkel LOCTITE 97504 Manuale Utente

84 

 

 

•  Push motor bracket (D) upwards, and lightly hand tighten the locking screw (G). 
•  Hold pump unit and use screws (E) to secure it to the motor bracket. Hand tighten 

the screws. 

•  Position Receptacle (N) underneath the Pump Unit, between the 3 centering pins. 
•  Hold Pump Unit and back off locking screw (G). Lower the pump unit slowly and 

carefully until it rests against the receptacle. 

•  Lightly hand tighten the locking screw (G). 
•  Back off screws (E) and align the pump unit. When the wiper ring (S) is positioned 

so that it is centered with respect to Receptacle (N), tighten screws (E).  

•  Connect plug connection (B) pump motor. 
•  Connect plug connection (A) pressure switch. 
•  Connect pressure line (H). 

 

Dispensing station must be adjusted each time after stator 
replacement, see Section 3.7.2. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Crush hazard: Risk of fingers getting crushed when pump unit is 
lowered. Do not allow fingers to get between follower plate and 
receptacle and/or product container. 

Top View