Brother HL-5070N Manuale Proprietario
CONTROL PANEL 3 - 7
Control panel buttons
The control panel buttons have the following functions:
Cancel printing
If you press the Job Cancel button while printing, the printer will immediately stop printing and will then
eject the paper.
eject the paper.
Wake-up
If the printer is in Sleep mode, press the Go or Job Cancel button to wake the printer up and go to the
Ready state.
Ready state.
Form feed
If the yellow Status LED is on, press the Go button. The printer will print any data that is left in the printer
memory.
memory.
Error recovery
If there is an error, the printer will recover automatically from some errors. If an error is not automatically
cleared, press the Go button to clear the error, and then continue to use the printer.
cleared, press the Go button to clear the error, and then continue to use the printer.
Reprint
If you want to reprint a document that has just been printed, you can do this by pressing and holding
down the Go button until all four LEDs are lit and then release the Go button.
down the Go button until all four LEDs are lit and then release the Go button.