Brother P-touch RL-700S Manuale Utente

9

Before using your machine

• SZ tapes can produce labels from 53.5mm to 100mm in length. When printing labels less than 

100mm in length the machine will still feed the tape through as if a 100mm label had been 
printed. This is so the RFID tag is correctly positioned and ready to print the next label.

• When using SZ tapes the machine will print a label counter in the leading margin of each label 

in the format XX/30 (“XX” is a number between 2 and 30, indicating how many labels have 
been printed with that cassette).
When all 30 labels are used, the machine will print END, indicating that the cassette needs to 
be replaced.

• The RFID tags themselves are in the leading portion of labels printed on SZ tape. Avoid 

cutting or damaging this portion, as this may impair or disable the RFID tag. 

• If ERROR is printed in the trailing portion of a label, an error occurred when the machine 

attempted to write data to the RFID tag. Move the machine away from any other reader/writers 
or other devices that may interfere with access to RFID tags and try printing again. 

• To avoid damaging cassettes and preventing further use, do not pull out the tape. 
• To avoid rendering data unreadable, do not apply labels to metal objects, electronic devices, 

or other RFID tags. 

02/30

03/30

Half-Cut

Up to 100 mm

At least 53.5 mm

Label counter

RFID Tag

ERROR

02/30

Print Data

Half-Cut