Braun NL MILLENIUM 5 Manuale Utente

Page 5

 
 

1.  Lower the platform to the ground level loading position. 

 

2.  Remove the pump cover. 

 

3.  Turn the adjustment screw (shown below) counter clockwise until the outer barrier does not raise 

when the Up button is pressed. 

 

4.  Turn the adjustment screw clockwise in 1/4 turn increments until the outer barrier raises and fully 

locks in position when the Up button is pressed.  DO NOT turn the adjustment screw beyond this 
position. 

 

5.  Verify the outer barrier will not raise when occuppied.

 

6.  Reattach the pump cover.

®

 

1.  Position the platform at the floor level loading 

position.

 

2.  Loosen the hex nut on the adjustment screw (do 

not remove hex nut).

 

3.  Turn the adjustment screw counter clockwise 

until the platform does not fold when the Fold 
button is pressed.

 

4.  Turn the adjustment screw clockwise in 1/4 turn 

increments and press the Fold button until the 
platform folds completely (Note:  return the plat-
form to floor level position after each attempt to 
fold the platform). 

 

5.  Turn the adjustment screw an additional 1/8 turn 

after the platform folds successfully.

 

6.  Tighten the hex nut without moving the adjust-

ment screw.

 

7.  Verify the platform will not stow while occupied.

Note: Secure adjustment 
screw and tighten hex 
nut following adjustment.