Brother FAX 2600 Manuale Utente

R E M O T E   F A X   O P T I O N S      

Enter your Remote Retrieval Access Code when the FAX/MFC picks up your 
call, so you can access features remotely. The access code is preset to 1 5 9  , 
but you can change this. (See 

For the FAX, press 

, 

, 

.

For the MFC, press 

, 

, 

, 

.

Enter a three-digit number from 000 to 999 and press 

.  

(Do not use the same digits that appear in your Fax Receive Code or Telephone 
Answer Code.)

Press 

 to exit.

You can call your FAX/MFC from any fax machine using touch tone and use a 
Remote Access Code and other button presses to retrieve fax messages. Cut out 
the Remote Retrieval Access Card on the last page of this manual and keep it in 
your wallet as an aid. (See 

Dial your fax number from a fax machine using touch tone.

When your FAX/MFC answers and beeps, immediately enter your Remote 
Retrieval Access Code (1 5 9  ).

The FAX/MFC signals the kinds of messages received:

The FAX/MFC then prompts you with two short beeps to enter a command.  If 
you wait longer than 30 seconds to enter a command, the FAX/MFC hangs up.  
If you enter an invalid command, theFAX/MFC beeps three times.

Press 

 to reset the FAX/MFC when you finish.

Hang up.

If your FAX/MFC is set to MANUAL mode, you can access your machine by 
waiting about 2 minutes, then entering the Remote Retrieval Access Code 
within 30 seconds.