Razor Bicycle Accessories 25143060 Manuale Utente
5
repair anD Maintenance
q
replacing the Fuse
warning:
To prevent shock, please follow
the instructions accordingly
and do not skip or combine any
steps.
2
Under the front fender and
through the frame, locate the
fuse box attached to the top of
the battery.
3
Open the fuse cover to
expose the fuse.
4
Remove the fuse and replace
with a new one of equal
amperage.
Note: Amperage rating is
located on top of fuse.
5
Close the fuse cover.
Amperage
number
q
replacing the chain
Tools required: 6mm Allen wrench, 10mm open wrench and Phillips screwdriver.
1
Make sure the power switch
is turned
OFF.
2
Remove the bolt on the
inside of the rear wheel.
Remove nut and pull bolt out
of axle.
3
Remove the 3 screws from
the top half of the chain guard
and remove.
1
Remove the bolt and wash-
ers on the outside of the rear
wheel.
5
Spread the chain tensioner
apart to loosen chain.
6
Remove chain from both
sprockets and replace with new
chain.
4
Remove the 2 screws from
the bottom half of the chain
guard and remove.
warning:
Do not touch motor after use.
Motor is (or can be) very hot.