Razor E125 Manuale Utente

Charger

Charger 

Plug 

Charger 

Port

Remove contents from box. Remove the foam separators that protect the components from damage during 

shipping. Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have 

occurred during shipping. Because the scooter was 95 percent assembled and packed at the factory, there 

should not be any problems, even if the box has a few scars or dents.

Estimated Assembly and Set-Up Time

Razor recommends assembly by an adult with experience in bicycle mechanics. 

Allow up to 20 minutes for assembly, not including initial charge time. 

Allow up to 12 hours for initial charge (see page 3 for charging information.

 BEFORE YOU BEGIN

2

       WARNING:

DO NOT USE NON-RAZOR 

PRODUCTS WITH YOUR 

RAZOR E100, E200 or 

E300 SCOOTER. The scooter 

has been built to certain Razor 

design specifi cations. The original 

equipment supplied at the time of 

sale was selected on the basis of 

its compatibility with the frame, 

fork and all other parts. Certain 

aftermarket products may or may 

not be compatible.

Required Tools

Some tools may be supplied; however, we recommend the use of mechanic’s grade tools. Use the supplied 

tools only as a last resort.

Need Help? Visit our web site for updates and a list of authorized service centers at www.razor.com
or call toll-free at 

866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacifi c Time.

6mm hexagonal 

key wrench

(included)

Bicycle-style tire pump 

for Schrader valve 

tires, with pressure 

gauge

Wheel

Brake Lever

Brake Lever

Adjuster

Extension Tube

Folding System

Speed Control

Front Fork

Folding System

Tire

Battery pack 

and motor 

controller

Headset

T-tube

Handlebar height adjust 

quick-release

On/off switch

and charging port

Infl ation valve 

adapter/extender 

(with E200 & E300 

only)

Locking Knob

E_Series_Manualv10.indd   3

3/10/06   2:10:52 PM