Yaesu FT-450D Manuale Utente
Page 84
FT-450D O
PERATION
M
ANUAL
MIC EQ
Function: Setting of the DSP microphone equalizer
Available Values: 0 ~ 9
Default: 0
You may select one of ten available DSP equaliza-
tion techniques for transmitted microphone audio.
0: Flat
1: Low-frequency component is decreased.
2: Mid-frequency component is decreased.
3: High-frequency component is decreased.
4: High-frequency component is enhanced.
5: Mid-frequency component is enhanced.
6: Low-frequency component is enhanced.
7: Low-frequency component is enhanced and High-
Available Values: 0 ~ 9
Default: 0
You may select one of ten available DSP equaliza-
tion techniques for transmitted microphone audio.
0: Flat
1: Low-frequency component is decreased.
2: Mid-frequency component is decreased.
3: High-frequency component is decreased.
4: High-frequency component is enhanced.
5: Mid-frequency component is enhanced.
6: Low-frequency component is enhanced.
7: Low-frequency component is enhanced and High-
frequency component is decreased.
8: Low-frequency component is decreased and Mid-
frequency component is enhanced.
9: Low-frequency component is decreased and High-
frequency component is enhanced.
MICGAIN
Function: Setting of the MIC gain
Available Values: LOW / NOR / HIGH
Default: NOR
Adjusts the microphone gain level for SSB/AM/FM.
LOW: When the microphone input is high the speech
Available Values: LOW / NOR / HIGH
Default: NOR
Adjusts the microphone gain level for SSB/AM/FM.
LOW: When the microphone input is high the speech
processor is turned off automatically.
NOR: For normal voice the speech processor is
turned on automatically.
HIGH: When the microphone input is low the speech
processor is turned on automatically.
MICSCAN (MIC AUTO SCAN)
Function: “ON/OFF” of microphone scanning func-
tion
Available Values: ON/OFF
Default: ON
Enables/disables scanning access via the
microphone’s [UP]/[DWN] keys.
OFF: The frequency or the memory channel is
Default: ON
Enables/disables scanning access via the
microphone’s [UP]/[DWN] keys.
OFF: The frequency or the memory channel is
scanned only while [UP]/[DWN] button is be-
ing pushed. The scanning stops when [UP]/
[DWN] button is released.
ing pushed. The scanning stops when [UP]/
[DWN] button is released.
ON:
When [UP]/[DWN] button is held for about 1.0
second, the scanning continues even after the
button is released.
second, the scanning continues even after the
button is released.
MY BAND
Function: Setting of the my band
Available Values: ON/OFF
Default: ON
The “My Bands” feature allows you to select several
Amateur bands, and make only those bands avail-
able for selection via the [BAND
Available Values: ON/OFF
Default: ON
The “My Bands” feature allows you to select several
Amateur bands, and make only those bands avail-
able for selection via the [BAND
]/[BAND] but-
tons.
ON: Only the bands that are turned on will be shown
ON: Only the bands that are turned on will be shown
when pushing the [BAND
]/[BAND] button.
OFF: A Band that is turned off will not appear when
the [BAND
]/[BAND] button is pushed.
N
OTE
:
The band presently in use and the General band can-
not be turned off.
not be turned off.
MY MODE
Function: Setting of my mode
Available Values: ON/OFF
Default: ON
The “My Mode” feature allows you to select an oper-
ating mode, and set whether or not the mode will be
displayed or skipped when the [MODE
Available Values: ON/OFF
Default: ON
The “My Mode” feature allows you to select an oper-
ating mode, and set whether or not the mode will be
displayed or skipped when the [MODE
]/ [MODE]
buttons are pressed.
This feature can be very useful in HF operation, when
the AM/FM/DATA modes are not used.
ON:
This feature can be very useful in HF operation, when
the AM/FM/DATA modes are not used.
ON:
Only the mode registered by turning on can be
selected by pushing [MODE
selected by pushing [MODE
]/ [MODE]
button.
OFF: A mode that is turned off will not be appear
when pressing the [MODE
]/ [MODE] but-
ton.
N
OTE
:
The mode displayed on the display while setting “My
mode” cannot be turned off.
mode” cannot be turned off.
P M-DWN (MIC-DWN PG)
Function: One of 52 functions can be preset and
assigned to the [DWN] key of the microphone.
Available Values: Please see page 16.
Default: DOWN
Presets of various functions can be assigned to the
[DWN] key of the microphone using this option.
assigned to the [DWN] key of the microphone.
Available Values: Please see page 16.
Default: DOWN
Presets of various functions can be assigned to the
[DWN] key of the microphone using this option.
P M-FST (MIC-FAST PG)
Function: One of 52 functions can be preset and
assigned to the [FST] key of the microphone.
Available Values: Please see page 16.
Default: FAST
Presets of various functions can be assigned to the
[FAST] key of the microphone using this option.
assigned to the [FST] key of the microphone.
Available Values: Please see page 16.
Default: FAST
Presets of various functions can be assigned to the
[FAST] key of the microphone using this option.
M
ENU
M
ODE