Znyx Networks bh5700 Manuale Utente
-f
Run zsnoopd in foreground. Default is to run it in
background.
-h <hostname>
Connect to remote host <hostname>.
-p <ppa>
Start zsnoopd on switch <ppa>. Default is 0.
-r <sec>
Time to wait, in seconds, before removing a port
with no router multicast traffic. Default is 260 seconds.
-t <sec>
Time to wait, in seconds, before removing a port
with no host multicast traffic. Default is 260 seconds.
-u <sec>
Time to wait, in seconds, before checking port
timeouts.
-v <vlan_id>
Enable zsnoopd for VLAN <vlan_id>. Default is
to enable zsnoopd on all VLANs. This option may be entered
more than once.
more than once.
EXAMPLES
In the following example, zsnoopd starts a background task that monitors incoming IGMP
packets and updates the Multicast Table (MARL) accordingly. This background task continues
throughout the life of the Layer 2 network.
packets and updates the Multicast Table (MARL) accordingly. This background task continues
throughout the life of the Layer 2 network.
zsnoopd
Once you run zsnoopd, use zmarl to display the contents of the MARL. zsnoopd deletes all
entries in the MARL when starting up, and when shutting down. Manual changes to the MARL
are not recommended while zsnoopd is running
entries in the MARL when starting up, and when shutting down. Manual changes to the MARL
are not recommended while zsnoopd is running
SEE ALSO
zconfig, zgmrpd
Ethernet Switch Blade User's Guide
release 3.2.2j
page 245