Znyx Networks bh5700 Manuale Utente

  # Fabric portions of the 7100 switch.  The actual coordination 

is dependent on the

  # setting of the board_synchronization_mode and the 
failover_mode.  In

  # switch failover_mode the number of up links in both switch 

planes is

  # considered.  In vlan and port failover mode they are not.  In 
all

  # failover_modes, if the data plane or fabric plane switch 

reboots or

  # power cycles, the HA partner will take mastership for all 
VLANs in

  # both planes.  board_synchronization is off by default. 

"basic" is the

  # only supported mode at this time.  The same mode must be set 
in both

  # the base and fabric switches.

#board_synchronization_mode: basic;

  # vrrpd_script:  Allows the user to add scripts to be executed 

during

  # vrrpd state transitions.  These scripts are run from the end 
of the

  # /etc/rcZ.d/surviving_partner/vrrpd.script file.  The user 

provided

  # script must be well behaved.  If it crashes, or hangs or 
delays it will

  # effect the SurvivingPartner performance.  The script is not 

run in

  # backround.  If this is needed, have your script background 
itself.

#vrrpd_script: /etc/rcZ.d/surviving_partner/my_vrrpd_script;

#vrrpd_script: /etc/rcZ.d/surviving_partner/my_vrrpd_script2;

Ethernet Switch Blade User's Guide

release  3.2.2j

page 41