Znyx Networks bh5700 Manuale Utente

  # gated_template:  Allows the user to provide a template for 

the

  # gated.conf file to be used by the sibling group.

#gated_template: /etc/rcZ.d/surviving_partner/gated.template

Once the configuration files are complete, run the zspconfig utility on the Master to configure 
all the scripts:

zspconfig –f zsp.conf

You will see output similar to this:

zspconfig -f zsp.conf

….

Would you like to install the Surviving Partner startup 
script[y,n,?] y

Would you like to start the Surviving Partner daemons without 

rebooting [y,n,?] y

Once configuration is complete, insure there are no superfluous S-type startup scripts in 
/etc/rcZ.d, and zsync your switch to save your configuration.

Now go to the backup switch and run zspconfig –u to get the appropriate configuration 
information from the Master,

zspconfig –u zhp0

The S60SP_startup script is useful in setting up proper switch replacement. By factory 
installing the S60SP_startup script in replacement switches, the replacement switches will boot 
looking for a Master switch configuration. The S60SP_startup works as follows:

It first looks for a local file /etc/rcZ.d/surviving_partner/zsp.primary.conf. If this 
file exists, it is used to configure the switch. Only the originally configured switch or Central 
Authority should contain this file. See Central Authority later in this Chapter for more 
information.

Next it uses zspconfig –u to attempt to contact a running Master switch to retrieve the proper 
configuration. This is the normal case for a replacement switch.

Ethernet Switch Blade User's Guide

release  3.2.2j

page 42