Smeg BQ6030 Manuale Istruttivo

REPLACING THE BURNER SECTION NOZZLES
1

Remove the grids and refractory plates inside the
barbecue section. 

2

Undo the screws (for each burner) on the rear
cross-member.

3

Remove the burners from the barbecue section.

4

Using a 7 mm socket wrench, undo the nozzles on
the taps (replace the nozzles as specified in the
table above). 

5

Adjust the primary air flows (see adjusting primary
air flows section).

6

Put the burners back into place correctly and
tighten the fixing screws.

REPLACING THE RADIANT GRILL NOZZLES (ON
TOP VERSIONS ONLY)
1

Remove the rear of the barbecue by undoing the
supporting screws.

2

Using a 7 mm spanner, unscrew the nozzle (1).

3

Replace the nozzles as specified in the table
above. To make it easier to fit the nozzle, the nut
(2) can be unscrewed.

4

Retighten the nut (2) with great care.

5

Fit the rear part back into place and screw on with
the fixing screws.

REPLACING THE ULTRARAPID BURNER NOZZLE
(BQ6030 MODELS ONLY)
1

Remove the grid, the burner cap and the flame
diffuser ring.

2

Using a 7 mm socket wrench, unscrew the burner
nozzle.

3

Replace the nozzle as specified in the table above.

4

Put the burner, the burner cap and the flame
diffuser ring back into place correctly.

5

Fit the rear part back into place and screw on with
the fixing screws.