Smeg BQ6030 说明手册
12
Instructions for the Installer
CHANGING THE NOZZLES
REPLACING THE BURNER SECTION NOZZLES
1
1
Remove the grids and refractory plates inside the
barbecue section.
barbecue section.
2
Undo the screws (for each burner) on the rear
cross-member.
cross-member.
3
Remove the burners from the barbecue section.
4
Using a 7 mm socket wrench, undo the nozzles on
the taps (replace the nozzles as specified in the
table above).
the taps (replace the nozzles as specified in the
table above).
5
Adjust the primary air flows (see adjusting primary
air flows section).
air flows section).
6
Put the burners back into place correctly and
tighten the fixing screws.
tighten the fixing screws.
REPLACING THE RADIANT GRILL NOZZLES (ON
TOP VERSIONS ONLY)
1
TOP VERSIONS ONLY)
1
Remove the rear of the barbecue by undoing the
supporting screws.
supporting screws.
2
Using a 7 mm spanner, unscrew the nozzle (1).
3
Replace the nozzles as specified in the table
above. To make it easier to fit the nozzle, the nut
(2) can be unscrewed.
above. To make it easier to fit the nozzle, the nut
(2) can be unscrewed.
4
Retighten the nut (2) with great care.
5
Fit the rear part back into place and screw on with
the fixing screws.
the fixing screws.
REPLACING THE ULTRARAPID BURNER NOZZLE
(BQ6030 MODELS ONLY)
1
(BQ6030 MODELS ONLY)
1
Remove the grid, the burner cap and the flame
diffuser ring.
diffuser ring.
2
Using a 7 mm socket wrench, unscrew the burner
nozzle.
nozzle.
3
Replace the nozzle as specified in the table above.
4
Put the burner, the burner cap and the flame
diffuser ring back into place correctly.
diffuser ring back into place correctly.
5
Fit the rear part back into place and screw on with
the fixing screws.
the fixing screws.
1
2