Sangean Electronics Sangean RCR-10 Manuale Utente
34
GB
Display & Audio setup
Dimmer control
The brightness of the display may be adjusted. If you use the unit in
the bedroom, you may prefer a higher brightness level than the
standard setting.
The brightness of the display may be adjusted. If you use the unit in
the bedroom, you may prefer a higher brightness level than the
standard setting.
1. Press and release the Snooze/Dimmer button repeatedly to adjust
the brightness level of the LCD display. The backlight level will
change with 8 different illumination levels so that you can see the
effect of the change.
the brightness level of the LCD display. The backlight level will
change with 8 different illumination levels so that you can see the
effect of the change.
2. Stop when the desired backlight level is selected.
Tone control
You can adjust the bass and treble of the sound of your RCR-10 to
enhance the tone while listening.
You can adjust the bass and treble of the sound of your RCR-10 to
enhance the tone while listening.
1. First ensure your radio is switched on. Press and release the Volume
control to enter the tone control setting.
control to enter the tone control setting.
2. The bass value will appear on the display. Rotate the Volume control
to adjust between +5~-5, and press and release the Volume control
to confirm the setting.
to adjust between +5~-5, and press and release the Volume control
to confirm the setting.
3. Then the treble value will appear on the display. Rotate the Volume
control to adjust between +5~-5, and press and release the
Volume control to confirm the setting.
control to adjust between +5~-5, and press and release the
Volume control to confirm the setting.
1-3