Psion Teklogix Schnellstart- Anleitung 7525 Manuale Utente
Chapter 5: Connecting To A LAN With 802.11b
Entering New Settings
Entering New Settings
74
Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual
Note: To change network settings, tap the stylus on a network. If the network for
which you are looking is not listed, tap on ‘Add new...’ and follow the
instructions on the screen.
instructions on the screen.
2. In the Networks to access drop-down menu, choose All Available,
Only access points or Only computer-to-computer depending on the
type of network(s) to which you connect.
type of network(s) to which you connect.
3. To connect only to networks you have already configured, disable the
checkbox next to Automatically connect to non-preferred networks.
Note: If you choose to automatically connect to non-preferred networks, your
WORKABOUT PRO will detect any new networks and provide the
screens necessary to configure them.
screens necessary to configure them.
5.2.1 Entering New Settings
A wireless network can be added manually or it can be added automatically when
the network is detected.
the network is detected.
Note: If the network is automatically detected. you can skip step 1 and step 2.
1. To manually enter new settings, tap on Start, Settings. Tap on the Con-
nections tab.
2. Tap on the Network Cards icon. In the Wireless tab, tap on Add new.
3. In the General tab, type a network name. If a network was detected, the
network name is automatically entered and cannot be changed.
4. In the Connects to drop-down menu, choose what your network will
use to connect
–
Work or Internet.
5. To use an ad-hoc connection, enable This is a device-to-computer
(ad-hoc) connection.
6. Tap on OK to save your changes.