Plasmon V15 Manuale Utente

Use the operator keys to perform the following actions:

If a hardware error occurs, an error code appears on the Status Screen, one frame at a time. Refer to
Appendix C for help in diagnosing and correcting errors. You must correct the error before operation can
continue.

This section describes how to set the library’s configuration options. Refer to the table below for an
explanation of each configuration item and determine which ones you need to set. Then follow the
appropriate steps in this section to set those options.

Ethernet configuration, control modes and sequential mode
configuration are described later in this manual.

(Arrow keys)

Moves up, down, left, or right through the menus and 
screens, depending on which directional arrow you press. 

[ESCAPE]

Returns to the previous menu or screen, or cancels an 
operation without saving changes.

[ENTER]

Selects the item next to the screen arrow or accepts a 
change.

[STATUS]

Displays the Status Screen, which shows library status, 
tape drive status, and operator messages.

[MENU]

Displays a menu of options for configuring the library, view-
ing information screens, and issuing commands to the 
library. 

[UNLOCK DOOR]

Stops robot operations and releases the door’s interlock 
mechanism. The door can then be opened manually.

[RESET]

Displays the Reset screen, which allows you to reset the 
library.