Phonetics 1104 Manuale Utente

Depending upon the remaining voltage, it may respond:

• “Battery Condition OK,”  if over 8.2 Volts.

• “Battery Condition low,” if between 7.2 and 8.2 Volts.

• “Replace batteries,”  if  below 7.2 Volts.

Calling the Model 1104 for a Status Report provides the
opportunity to access other functions, using Touch-Tone

™

push-

button commands.  Remote telephone commands include: 

• Disabling/enabling any input. 

• Disabling/enabling High Sound Alarm monitoring.

• Disabling/enabling AC Power monitoring.

• Activation of Listen-In Time.

• Activation of the Status Report.

To issue commands by telephone, first dial the number of the
Model 1104 to access the Status Report. The Status Report will
be followed by the programmed Listen-In Time. If you remain on
the telephone, the Status Report will be repeated, followed by a 10
second waiting period and hang-up. During this 10 second waiting
period, or at any time during the call, other commands may by
accessed by pressing any push button on the telephone.

If a Security Code is in effect, the Model 1104 will prompt you
with: “Enter Security Code.” If no Security Code is set, then it
will say “O.K.”

• Enter your Security Code (4 digits) with the telephone push

buttons. If the code you enter is correct, the Model 1104 will
respond: “OK.”

• If you enter the wrong Security Code, the Model 1104 says,

“Error.  Have a good day,” and hangs up.

Disabling/enabling inputs – If an input is set to detect an alert
condition, it can be disabled to prevent the Model 1104 from
dialing out, or re-enabled at any time.  

This feature allows the convenience of disabling an input, even if
you are away from the site of the Model 1104. One such
application may involve an input programmed to detect
unauthorized entry. You are in another locale, but must allow
someone else temporary access to the area monitored by the
Model 1104. Using a Touch-Tone

™

telephone, you can disable the