Phonetics 1104 Manuale Utente

appropriate input (thereby disabling any alarm dial-out response).
The input remains disabled until you issue the same command,
which effectively returns it to its former, enabled state.

Press the following push-buttons on the Touch-Tone

™

telephone

to execute the desired command:

* (asterisk), 1

...equal to Sensor On/Off, for input 1. To re-enable the input,

repeat the same Touch-Tone

™

button sequence used for

disabling.

* (asterisk), 2

...equal to Sensor On/Off for input 2, and so on, for inputs up

to 4. To re-enable the input, repeat the same Touch-Tone

™

button sequence used for disabling.

Disabling/enabling High Sound Monitoring –

* (asterisk), 9

...equal to SENSOR ON/OFF for High Sound Alarm

monitoring. To re-enable High Sound Alarm, repeat the
command.

Disabling/enabling AC Power –

* (asterisk), 0

...equal to Sensor On/Off for AC Power monitoring. To re-

enable AC Power monitoring , repeat the command.

Activating Listen-In Time –

# (pound), 1

...initiates Listen-In Time for listening to on-site sounds for the

programmed time available.

Activating Status Report –

# (pound), 2

...initiates a full recitation of the Status Report.

Exiting –

# (pound), # (pound)

...forces exit. The 1104 says, “Have a good day,” and hangs

up.

Chapter 6: Acknowledgment, Status Report & Remote Access