Optiview MPEG-4 Manuale Utente
User’s Manual
31
Purge All Event Data
Select the item to delete all event video from database.
Select the item to delete all event video from database.
Purge Event Before
The item is used to delete event video that recorded before a specific date.
The default of this item is <2000/01/01>.
The item is used to delete event video that recorded before a specific date.
The default of this item is <2000/01/01>.
4.6
Dome Control
MPEG-4 DVR allows user to control a dome camera by the front panel.
In Live mode, user can press CHANNEL key to display the desired dome
camera in full view. To enter Dome Control mode, press the DOME key and
press channel key 2 to display the hint screen; to exit the Dome Control mode
and back to live mode, press ESC or DOME.
To configure the dome controls settings, see the following sections.
In Live mode, user can press CHANNEL key to display the desired dome
camera in full view. To enter Dome Control mode, press the DOME key and
press channel key 2 to display the hint screen; to exit the Dome Control mode
and back to live mode, press ESC or DOME.
To configure the dome controls settings, see the following sections.
4.6.1
Dome Connection
Follow the steps to install dome camera.
• See section 2.4 Rear Panel Connections for RS-485 port pin definition.
• Refer to the following figure. Connect the R+, R- terminals on the dome
• See section 2.4 Rear Panel Connections for RS-485 port pin definition.
• Refer to the following figure. Connect the R+, R- terminals on the dome
camera to the D+, D- terminals on the RS-485 port by RS-485 cable
respectively.
respectively.