Optiview MPEG-4 Manuale Utente

User’s 

Manual 

 

        

 

 

         

32 

The Dome Protocol item lists the available dome protocols for communicating 
with dome cameras connected to the MPEG-4 DVR. From the Main menu, 
select <Camera Setup> and press ENTER. The following menu is displayed. 
 

Camera Setup 

1. Camera Select 
2. Dome Protocol 
3. Dome ID 
4. Camera Title 
5. Covert 
6. Termination 
7. Brightness 
8. Contrast 
9. Saturation 

10. Hue 

CH1   

None   

0   

 

NO   
NO   

0   
0   
0   
0   

 

To configure dome protocol, select a camera first and set the communications 
protocol associated with dome camera using the Direction keys and ENTER. 
The available protocol includes 

<Pelco D>, <Pelco P>, 

<AD422>, <Fastrax 2> and <None> (default).   

NOTE: The settings become effective after saving the changes and 
exiting from the menu. 

 

MPEG-4 DVR controls the domes via RS-485 communication protocol. The 
RS-485 parameters in MPEG-4 DVR must be set to the same parameters as 
the protocol for RS-422 setup of the dome. 

Users are allowed to change the RS-485 settings of the MPEG-4 DVR. 
Select <System Setup> in Main menu, then select <RS485 Setup> from the 
System Setup menu and press ENTER. The following menu is displayed. 

RS485 Setup 

1 Unit ID                                       
2 Baud Rate                 
3 Bits 
4 Stop 
5 Parity    

224   

9600 

8 
1 

None