NEC 2400 PX Manuale Utente
NEAX2400 IPX Feature Programming Manual
Page 98
NDA-24297, Issue 1
B-12
Brokerage Hotline - Outside
Service Conditions (cont’d)
15.
The station, the Attendant Console / Desk Console (operator call), and the trunk can be a destination for
Hotline.
Hotline.
16.
When Call Forwarding - All Calls/Busy Line/Don’t Answer service has been set to the called station, these
features are available for the call to the station.
features are available for the call to the station.
17.
When a calling party encounters a busy station, the call may bridge into the connection, depending on the
data assigned by the ASYD command.
data assigned by the ASYD command.
Programming
STEP 1:
ASDT
- Assign to a 16LC circuit the following data:
TN:
Tenant Number
STN:
Station Number
LENS: Line Equipment Number (6 digits)
TEC:
TEC:
Telephone Class (1 - 31)
1:
1:
DP (10 pps)
2:
PB
3:
DP/PB
12:
D
term
13:
Data terminal via D
term
14:
Hotline
15:
CAS Line
18:
Virtual circuit
Note
RSC:
Route Restriction Class (0 - 15)
SFC:
Service Feature Class (0 - 15)
STEP 2:
ASPD
- Assign ADC code, maximum of 3 digits; assign CD = telephone number, maximum 24 digits,
corresponding to the ADC.
STEP 3:
AHLS
- Assign the station number programmed above for the following parameters:
HOT TN:
Hotline Tenant
STN:
Hotline Station
TYPE:
Connection Type 2 - Abbreviated Digit Code (ADC)
Connection Type 3 - Trunk Line
Connection Type 3 - Trunk Line
ADC:
Abbreviated Digit Code (C) of the Destination Station
CON TN:
Connecting Station’s Tenant
CON STN:
Connecting Station’s Number
CON RT:
Connecting Station’s Route Number
CON TK:
Connecting Station’s Trunk Number
STEP 4:
AKYD
- Assign to a D
term
a line appearance of the Hotline station number.
TN:
Tenant Number
STN:
Station Number
TP:
Type of D
term
[0/1]:
KYN:
Key Number (1 - 40)
KYI:
Service Index
0: Key not used
1: Feature Key
0: Key not used
1: Feature Key