NEC 2400 PX Manuale Utente
NEAX2400 IPX Feature Programming Manual
Page 226
NDA-24297, Issue 1
C-69
Call Forwarding - All Calls - Announcement
C-69
Call Forwarding - All Calls - Announcement
General Description
This feature permits all calls destined for a particular station to be routed to a recorded announcement. Activation
and cancellation may be accomplished by either the individual user or the ATTENDANT CONSOLE [A-3].
and cancellation may be accomplished by either the individual user or the ATTENDANT CONSOLE [A-3].
Operating Procedure
To activate from an individual station
1.
Lift the handset; receive dial tone.
2.
Dial the CALL FORWARDING - ALL CALLS - ANNOUNCEMENT access code (same as CALL
FORWARDING - ALL CALLS [C-5]); receive special dial tone
FORWARDING - ALL CALLS [C-5]); receive special dial tone
3.
Dial the desired announcement trunk access code (same as ANNOUNCEMENT SERVICE [A-15]);
receive service set tone.
receive service set tone.
To cancel from an individual station
1.
Lift the handset; receive dial tone.
2.
Dial the CALL FORWARDING - ALL CALLS - ANNOUNCEMENT cancel code (same as CALL
FORWARDING - ALL CALLS [C-5]); receive service set tone.
FORWARDING - ALL CALLS [C-5]); receive service set tone.
Service Conditions
1.
This service feature requires one of the following hardware alternatives:
a.) Central Office Trunk (COT) or TIE Line Trunk (TLT) and an announcement machine.
b.) Digital Announcement Trunk (DAT).
b.) Digital Announcement Trunk (DAT).
2.
Stations with this feature set may originate calls and access the CALL FORWARDING - ALL CALLS -
ANNOUNCEMENT cancellation code.
ANNOUNCEMENT cancellation code.
3.
Stations activating CALL FORWARDING - ALL CALLS - ANNOUNCEMENT can be restricted from
placing any calls, except to the Attendant, depending upon system data.
placing any calls, except to the Attendant, depending upon system data.
4.
There is no limitation to the number of stations which can simultaneously set CALL FORWARDING -
ALL CALLS - ANNOUNCEMENT.
ALL CALLS - ANNOUNCEMENT.
5.
Stations may be assigned this feature via CLASS OF SERVICE - INDIVIDUAL [C-15] programming in
system data.
system data.
6.
For CALL FORWARDING - ALL CALLS - ANNOUNCEMENT, announcement trunk access numbers
may be programmed as the destination number.
may be programmed as the destination number.
7.
When a call is directed to a forwarded station, one burst of ringing signal will be sent to the station to
indicate that it is call forwarded.
indicate that it is call forwarded.
8.
Call forwarding data remains programmed, even if the system is reinitialized or a power failure occurs.
9.
CALL FORWARDING - ALL CALLS - ANNOUNCEMENT can be provided for a maximum of 127
trunks, which include the announcement trunks for:
trunks, which include the announcement trunks for:
ANNOUNCEMENT SERVICE
[A-15]
ANNOUNCEMENT SERVICE - ATTENDANT
[A-59]
CALL FORWARDING - INTERCEPT /ANNOUNCEMENT
[C-25]