NEC 2400 PX Manuale Utente
NEAX2400 IPX Feature Programming Manual
Page 252
NDA-24297, Issue 1
C-151
Call Return
C-151 Call
Return
General Description
This feature allows the D
term
or an analog station to save the received calling number and the received number of
the station. The following two types of saving features are available:
•
Automatic Saving: The received calling number/number of the station is automatically saved when the
station rings. The stored number can be dialed by pressing the feature key or dialing the
access code.
access code.
•
Manual Saving:
The received calling number is manually saved by the D
term
user while in conversation.
The stored number can be dialed by pressing the feature key.
Operating Procedure
Automatic Saving
1.
Saving Calling Number
a.) A call is terminated to an analog station or My Line of the D
term
.
b.) The received calling number is automatically saved. When the station is the D
term
with the Call
Return key, the received calling number is displayed on the LCD and the Call Return key lights
red.
red.
Note:
The maximum number of calling numbers stored for the D
term
/analog station is as follows:
D
term
:
3
Analog station:
1
2.
Displaying Stored Calling Number (for the D
term
with the Call Return key)
a.) While in idle state, press the Call Return key.
b.) The saved calling number is displayed for 5 seconds. When multiple numbers are stored, the
b.) The saved calling number is displayed for 5 seconds. When multiple numbers are stored, the
display changes each time the Call Return key is pressed. The number is displayed from the latest
to the oldest. When the indication reaches the oldest number, the latest number appears again by
pressing the Call Return key.
to the oldest. When the indication reaches the oldest number, the latest number appears again by
pressing the Call Return key.
3.
Call Origination
• When using the Call Return key on the D
term
a.) Display the desired number by pressing the Call Return key. (Refer to (2).)
b.) Lift the handset and receive dial tone.
c.) Press the Call Return key. The displayed number is dialed.
b.) Lift the handset and receive dial tone.
c.) Press the Call Return key. The displayed number is dialed.
Note:
The dialed number is automatically deleted. When all the stored numbers are deleted, the Call Return key
goes off.
goes off.
• When using Access Code
a.) Lift the handset and receive dial tone.
b.) Dial the access code for Call Return. The last number saved is dialed.
b.) Dial the access code for Call Return. The last number saved is dialed.
Note:
The dialed number is not deleted.
4.
Deleting Stored Number (for the D
term
with the Call Return key)
a.) Display the desired number by pressing the Call Return key. (Refer to (2).)
b.) Press the “*” or “#” key (according to system data assignment). The displayed number is deleted
b.) Press the “*” or “#” key (according to system data assignment). The displayed number is deleted
and CANCEL is displayed on the D
term
LCD.
Note 1:
When all the stored numbers are deleted, the Call Return key goes off.
Note 2:
Note that the delete key (“*” or “#”) is effective while the calling number is displayed for 5 seconds.