NEC 2400 PX Manuale Utente
NEAX2400 IPX Feature Programming Manual
Page 386
NDA-24297, Issue 1
I-1
Immediate Ringing
I-1 Immediate
Ringing
General Description
This feature causes called stations to ring immediately upon establishment of connections.
Operating Procedure
No manual operation is required.
Service Conditions
1.
Ringing is applied to a called station as soon as the switch has determined that the station is idle. There is
no delay caused by waiting for a ring cycle.
no delay caused by waiting for a ring cycle.
2.
This feature applies to STATION-TO-STATION [S-11], Attendant (originated or completed), Direct
Inward Dialing (DID), and tie line calls.
Inward Dialing (DID), and tie line calls.
3.
An idle station rings immediately after the last digit of the called station is dialed.
Programming
ASYD
- System Data 1, Index 27, Bit 7. Assign data “1”.