NEC 2400 PX Manuale Utente

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1

Page 559

Outgoing Trunk Queuing - D

term

O-2D

FCCS Programming (cont’d)

System Data 1, Index 41: Designate the Trunk Queuing Override Timer
Index 68, b3:

Enables automatic cancel timer

0/1:

-/Automatic cancel timer is Available

Index 159:

Designate Automatic Cancel Timer

STEP 2:

ASPAN

- These data must be assigned to the NCN.

TN:

Tenant Number

ACC:

Access number

CI:

B = Busy (for Entry), N = Normal (for Cancel)

SRV:

SSC

SID:

19 = OG Queuing-Entry

SID:

20 = OG Queuing-Cancel

STEP 3:

ANPDN

- These data must be assigned to the NCN.

TN:

Tenant

1st DC:

1st Digit

CI:

Normal (N), Hooking (H) and Busy (B)

NND:

Number of Necessary Digits

BLF:

Busy Lamp Field

STEP 4:

ARTDN

- These data must be assigned to the NCN.

LGRT:

Logical Route Number

Assign CDN 9:TQ, Trunk Queuing Service = 1

Note 1:

When using ASYDL or ASYDN to program an FCCS feature, the basic programming of ASYD is required
in addition to ASYDL or ASYDN.

Note 2:

The current data should also be set in addition the above-mentioned command.
The command to be set to the node that accommodates the trunk: ARTD
The command to be set to all the nodes: ASFC, AKYD, ASPA