NEC 2400 PX Manuale Utente
NEAX2400 IPX Feature Programming Manual
Page 560
NDA-24297, Issue 1
O-6
Off-Hook Alarm
O-6 Off-Hook
Alarm
General Description
This feature allows a user to call the Attendant or a predetermined station by simply staying OFF-HOOK. The
calling number is automatically displayed at the ATTENDANT CONSOLE [A-3] or a D
calling number is automatically displayed at the ATTENDANT CONSOLE [A-3] or a D
term
series with a display.
Operating Procedure
1.
Lift the handset and stay off-hook.
2.
After a predetermined time elapses (2 to 30 sec.), the call will terminate at the ATTENDANT CONSOLE
[A-3] or the predetermined station.
[A-3] or the predetermined station.
3.
The calling telephone number will be displayed at the ATTENDANT CONSOLE [A-3] or D
term
when
answered.
Service Conditions
1.
Predetermined timing interval is programmable through the MAINTENANCE ADMINISTRATION
TERMINAL [M-18] (MAT) (2 to 30 seconds).
TERMINAL [M-18] (MAT) (2 to 30 seconds).
2.
In the night mode, an OFF-HOOK ALARM call directed to the ATTENDANT CONSOLE [A-3] will not
terminate at the ATTENDANT NIGHT TRANSFER [A-19] predetermined night station. The caller will
receive a reorder tone.
terminate at the ATTENDANT NIGHT TRANSFER [A-19] predetermined night station. The caller will
receive a reorder tone.
3.
A station will be assigned as a member of an OFF-HOOK ALARM group and will be connected to the
predetermined stations that are assigned for each off-hook group.
predetermined stations that are assigned for each off-hook group.
4.
Maximum number of OFF-HOOK ALARM groups is 7 per-TENANT [T-12] group. A group number
must be assigned to all the stations to be included in a group.
must be assigned to all the stations to be included in a group.
5.
The station assigned as a terminating station of each OFF-HOOK ALARM group can be a member of a
HUNTING GROUP [S-7, 8, 9].
HUNTING GROUP [S-7, 8, 9].
6.
This service is programmed via system data. Stations may be restricted from using this feature in CLASS
OF SERVICE - INDIVIDUAL [C-15].
OF SERVICE - INDIVIDUAL [C-15].
7.
The ATTENDANT CONSOLE [A-3] can answer by pressing EMG key, which must be assigned by the
MAT [M-18]. Using the ANSWER key will not give priority to the OFF-HOOK ALARM call.
MAT [M-18]. Using the ANSWER key will not give priority to the OFF-HOOK ALARM call.
8.
The predetermined target station can set CALL FORWARDING - ALL CALLS [C-5] and CALL
FORWARDING - BUSY LINE [C-2].
FORWARDING - BUSY LINE [C-2].
9.
When the predetermined station is busy, the OFF-HOOK ALARM call receives ringback tone until the
station becomes idle.
station becomes idle.
10.
This feature cannot be applied while in CONSULTATION HOLD - ALL CALLS [C-17] or CALL HOLD
[C-6] mode.
[C-6] mode.
11.
When an OFF-HOOK ALARM call is directed to a Pilot station of a UCD [U-1] group, queuing is not
available when all the stations within the group are busy.
available when all the stations within the group are busy.
12.
This feature can also be activated when a station and the called party belong to different nodes.