NEC EXPRESS 5800 Manuale Utente
Setting Up Your System 2-17
NOTE:
Make sure of the cable you are going to connect. The "100BASE-
TX/10BASE-T connector" and the "serial port 2 connector" of this server
have the same shape. Be careful not to connect a cable to a wrong
connector. To prevent wrong connection, write "LAN port" on a tag and
put the tag to the connector of the LAN cable that is to be connected to
this server.
have the same shape. Be careful not to connect a cable to a wrong
connector. To prevent wrong connection, write "LAN port" on a tag and
put the tag to the connector of the LAN cable that is to be connected to
this server.
*1 Windows NT 4.0 needs the compliant driver. Any USB keyboard and mouse are not supported.
*2 A leased line cannot be connected directly to this connector.
*2 A leased line cannot be connected directly to this connector.
The console of a management PC can be connected to only serial port 2. (BIOS setting required)
This connector is capped for preventing incorrect connection in the standard status.
This connector is capped for preventing incorrect connection in the standard status.
*3 Use the provided branch cable.
*4 Connect the power cord to a circuit breaker of 15 A or less.
*4 Connect the power cord to a circuit breaker of 15 A or less.
Device with
the serial
interface
(e.g.,
Management
PC)
the serial
interface
(e.g.,
Management
PC)
*2
USB device
*1
Keyboard
Mouse
Display unit
Hub
(multiport repeater)
USB device
*1
USB device
*1
FRONT
REAR
Device with the
serial interface
*2
Device with the
SCSI interface
*3
Finally connect the
provided power cord to
the receptacle.
provided power cord to
the receptacle.
*4
If connecting the server
to UPS, see the
explanation below.
to UPS, see the
explanation below.