NEC NP600CM Manuale Utente
ISSUED: 08-05-08 SHEET #: 056-9008-1
Visit the Peerless Web Site at www.peerlessmounts.com
4 of 10
For customer care call 1-800-865-2112 or 708-865-8870.
NOTE: Refer to accompanying instructions with ceiling plates (sold separately) for installing these models to
ceiling.
ceiling.
Screw projector mount assembly (A) onto extension column as shown in figure 2.1.
NOTE: For 3/4" extension columns, reducer ACC 913 (not included) will be required as shown in figure 2.2. Tighten
swivel stop screw against extension column, flush mount tube or reducer using 4 mm security allen wrench (B) as
shown in figure 2.3.
NOTE: Swivel stop screw is used to jam against threads of extension column, flush mount tube or reducer to
prevent any excess movement of projector mount assembly (A). Do not overtighten screw; overtightening screw will
damage threads making it difficult to separate products.
NOTE: For 3/4" extension columns, reducer ACC 913 (not included) will be required as shown in figure 2.2. Tighten
swivel stop screw against extension column, flush mount tube or reducer using 4 mm security allen wrench (B) as
shown in figure 2.3.
NOTE: Swivel stop screw is used to jam against threads of extension column, flush mount tube or reducer to
prevent any excess movement of projector mount assembly (A). Do not overtighten screw; overtightening screw will
damage threads making it difficult to separate products.
Skip to step 3.
A
1 1/2" EXTENSION
COLUMN
(SOLD SEPARATELY)
UL LISTED EXT OR ADJ
SERIES)
COLUMN
(SOLD SEPARATELY)
UL LISTED EXT OR ADJ
SERIES)
ARROW
INDICATES
FRONT OF
MOUNT
INDICATES
FRONT OF
MOUNT
A
3/4" EXTENSION COLUMN
(SOLD SEPARATELY)
(SOLD SEPARATELY)
ACC 913
(NOT UL LISTED)
(SOLD SEPARATELY)
(NOT UL LISTED)
(SOLD SEPARATELY)
SWIVEL STOP
SCREW
SCREW
CMJ 455
(SOLD SEPARATELY)
(SOLD SEPARATELY)
ARROW
INDICATES
FRONT OF
MOUNT
INDICATES
FRONT OF
MOUNT
Installation to Extension Column / Ceiling Plate
2
fig. 2.1
fig. 2.2
fig. 2.3