Korg Toneworks AX1500G Manuale Proprietario
10
2. Playing the AX1500G
As an alternative to using value knobs 4 and 5, you can
use the cursor switches (
use the cursor switches (
,
) to switch parameters,
and use the MASTER/VALUE switches (
▲
,
▼
) to adjust
the parameter values.
While the metronome is operating, pressing the EXIT
switch will stop the metronome and return to Play mode.
switch will stop the metronome and return to Play mode.
When the AX1500G is bypassed or muted, it will not be
possible to adjust the tempo or level.
possible to adjust the tempo or level.
Expression pedal
You can use the expression pedal for realtime control
of eleven types of effects in the pedal effect block.
If the program uses an effect in the pedal effect block,
the LED of pedal effect block will light.
The pedal LED will light yellow for VOLUME effect,
green for a VOX WAH--RING MOD modulation-type
effect, or red for a HOLD DELAY--SAMPLE&PLAY
ambience-type effect.
For the HOLD DELAY, TAP TEMPO DELAY, and
SAMPLE & PLAY
of eleven types of effects in the pedal effect block.
If the program uses an effect in the pedal effect block,
the LED of pedal effect block will light.
The pedal LED will light yellow for VOLUME effect,
green for a VOX WAH--RING MOD modulation-type
effect, or red for a HOLD DELAY--SAMPLE&PLAY
ambience-type effect.
For the HOLD DELAY, TAP TEMPO DELAY, and
SAMPLE & PLAY
pedal effects, the operation is
different than for other effects (refer to p.21).
Using the expression pedal as you play
1. In Play mode, select a program that uses the
1. In Play mode, select a program that uses the
expression pedal.
2. Make sure that the pedal LED is lit. If it is not lit,
press the expression pedal firmly once to make the
pedal LED light (the pedal will be turned on).
pedal LED light (the pedal will be turned on).
3. Operate the expression pedal while playing your
guitar. As you raise and lower the pedal, the output
sound will change correspondingly.
sound will change correspondingly.
If Volume is selected in the PEDAL effect block, it will not
be possible to turn the expression pedal on/off. It will
remain on (pedal LED lit yellow).
be possible to turn the expression pedal on/off. It will
remain on (pedal LED lit yellow).
The on/off status of the expression pedal is not
memorized by each program.
memorized by each program.
Do not apply excessive force to the expression pedal.
Before operating the expression pedal, verify the amount
of force that is required to make the pedal LED light and
to apply the effect.
Before operating the expression pedal, verify the amount
of force that is required to make the pedal LED light and
to apply the effect.
Individual mode
In this mode you can press the program switches and
expression pedal switch to turn modulation, pedal,
and ambience effect blocks on/off individually.
As in Play mode, you can switch the effect channel,
and use operations such as metronome, editing, and
program write.
expression pedal switch to turn modulation, pedal,
and ambience effect blocks on/off individually.
As in Play mode, you can switch the effect channel,
and use operations such as metronome, editing, and
program write.
In this mode it is not possible to switch programs or to
select bypass or mute.
select bypass or mute.
Entering Individual mode
In Play mode press and hold the Bank switch for one
second, and you will enter Individual mode. The name
display will indicate “
second, and you will enter Individual mode. The name
display will indicate “
-INDIV-
,” and the bank number
display will indicate “ .”
When you enter Individual mode, the program LED’s
will indicate the on/off status of each effect block
(synchronized with the effect block LED’s).
MODULATION
will indicate the on/off status of each effect block
(synchronized with the effect block LED’s).
MODULATION
corresponds to program switch (LED)
1, AMBIENCE to 2, PEDAL to 3.
Each time you press a program switch, it will turn on/
off. For the pedal effect, pressing the expression pedal
firmly will turn it on/off (the switch is located under
the pedal). However for some pedal effects such as
SAMPLE & PLAY
Each time you press a program switch, it will turn on/
off. For the pedal effect, pressing the expression pedal
firmly will turn it on/off (the switch is located under
the pedal). However for some pedal effects such as
SAMPLE & PLAY
, the expression pedal is used in a
special way, and cannot be turned off once the pedal
has been turned on.
has been turned on.
For some effects, it is not possible to simultaneously use
the MODULATION and PEDAL effect blocks, or the
PEDAL and AMBIENCE effect blocks. If you attempt to
simultaneously turn on both of these effect blocks, the
effect block that was turned on first will automatically be
turned off.
the MODULATION and PEDAL effect blocks, or the
PEDAL and AMBIENCE effect blocks. If you attempt to
simultaneously turn on both of these effect blocks, the
effect block that was turned on first will automatically be
turned off.
Indication of currently used effect blocks
Exiting Individual mode
To return to Play mode, press either the bank switch or
the EXIT switch.
the EXIT switch.