Juniper Networks 5000 SERIES Manuale Utente

Mounting the NetScreen-5000 Series

NetScreen-5000 Series 

15

There are two ways to rack mount the NetScreen-5200:

Rear and front mount

Mid-mount

You can only front-mount the NetScreen-5400.

M

OUNTING

 

THE

 N

ET

S

CREEN

-5000 S

ERIES

The following sections describe how to rack mount the NetScreen-5000 Series.

NetScreen-5200 Front and Rear Mount

To mount the NetScreen-5200 with support from the front and rear, you need four fitted 
screws, a Phillips-head screwdriver, the rear slide kit, and brackets.

To mount the NetScreen-5200:

1.

Screw the rear mount bracket to the rear rack posts.

2.

With the indented groove of each slide facing outward, screw the slides to the 
middle of each side of the chassis.

3.

Slip the slides into the rear mount brackets, then push the NetScreen-5200 
forward until the left and right brackets contact the front rack posts, as shown 
below.

4.

Screw the left and right brackets to the rack.