Juniper Networks 5000 SERIES Manuale Utente
Chapter 3 Configuring the Device
32
User’s Guide
C
ONFIGURING
A
GGREGATE
I
NTERFACES
The NetScreen-5000 Series device allows you to combine two or more physical ports into a
single virtual port. This virtual port is known as an aggregate interface. Only Secure Port
Modules (SPMs) support this feature.
single virtual port. This virtual port is known as an aggregate interface. Only Secure Port
Modules (SPMs) support this feature.
•
On a 5000-8G SPM, you can create up to four aggregate interfaces.
•
On a 5000-2G24FE SPM, you can create up to five aggregate interfaces.
The 5000-8G SPM supports only certain combinations of ports for aggregate interfaces.
For example, a 5000-8G SPM residing in slot 2 only supports the following port
combinations:
For example, a 5000-8G SPM residing in slot 2 only supports the following port
combinations:
•
Ethernet2/1 and Ethernet2/2
•
Ethernet2/3 and Ethernet2/4
•
Ethernet2/5 and Ethernet2/6
•
Ethernet2/7 and Ethernet2/8
You must assign one of the following names to the aggregate interface: aggregate1,
aggregate2, aggregate3, or aggregate4.
aggregate2, aggregate3, or aggregate4.
In the following example, you combine two Gigabit Ethernet mini-GBIC ports, each
running at 1 Gbps, into an aggregate interface running at 2 Gbps. The aggregate interface
consists of Ethernet ports 1 and 2 on a 5000-8G SPM (residing in slot 2).
running at 1 Gbps, into an aggregate interface running at 2 Gbps. The aggregate interface
consists of Ethernet ports 1 and 2 on a 5000-8G SPM (residing in slot 2).
To create the aggregate interface:
1.
(Optional) To see what physical ports are available on your NetScreen-5000
Series device:
Series device:
get interface
2.
To create an aggregate interface name:
set interface string zone zonename
where string is a legal aggregate interface name (aggregate1, aggregate2,
aggregate3, or aggregate4).
aggregate3, or aggregate4).
For example, to create the aggregate interface name aggregate1:
set interface aggregate1 zone zonename
3.
To assign ports ethernet2/1 and ethernet2/2 to the aggregate1 interface name:
set interface ethernet2/1 aggregate aggregate1
set interface ethernet2/2 aggregate aggregate1
4.
(Optional) To see the updated port list and details about the new aggregate
interface:
interface:
get interface
get interface aggregate1