MRV Communications EM316-2SFP Manuale Utente

 

 

EM316-2SFP User Guide 

 

 
P/N 1259003-001 Rev C3 

 

38 

 

 

 

 
The show command displays management and system information related to the 

EM316LNXNM-OT management module, the hosting chassis, other modules in the chassis, 
and ports available within the managed system. The arguments (parameters) following the 
show

 command and the operational context displayed by the system prompt control the 

many functions available through this command. 
 
The box below illustrates the show command applied with no arguments in the port context 

of a 2SFP module with a specific SFP transceiver installed. This display will vary with each 
installation. 
 

 

 
 
The CLI help for the show command is identical in the port-level context and the slot-level 
contexts. Refer to the Slot-Level Commands section for “show?” and “show ?” information. 

fiberdriver(port/1.1.1)# show 
      Port: 1.1.1 
      Name: SFP at 1.1.1 
Part #/Rev: SFP-DGD-SX/A 
  Protocol: Transparent 
 
Enable: enable             LIN: enable 
  Link: signal Detect 
                       Nom. BR: 2100 
 
     Loopback: off 
Serial Number: P6K21R5 
  Vendor Info: MRV COMM. INC. 
 
Connector: fo LC  Medium: multi Mode 
Wavelength(nm): 850 
  TxPower(dBm): -5.066  RxPower(dBm): -6.042  BiasCurrent(mA): 5.008 
        DDiags: Ok           Temp(C): 46            Supply(V): 3.272 
 
fiberdriver(port/1.1.1)#