Lightwave Communications SCS3230 Manuale Utente

A Lantronix Company  

 

SCS3230 System Administrator's Guide  

15.00.038

 

 - 29 - 

May 2002 

 

 
The SCS3230 is designed so that the default device port communications settings will match 
the communications settings of most Sun® server and workstation console ports (9600 baud, 8 
data bits, no parity, one stop bit).  Other equipment types (i.e., Cisco®) frequently use similar 
communications settings; check the manuals included with the equipment for the correct 
settings.  The table below lists the default serial port communications settings for the SCS3230.  
Sections 6.3 and 6.4 outline the commands for changing the terminal and device port 
communications settings. 
 
The following tables list the adapter part number and port configuration for some common 
equipment types that may be connected to the SCS3230.  Note that in some cases, an 
additional cable or adapter is included with the equipment to convert a proprietary pinout to an 
EIA-standard pinout.  Also, note that it is not possible to connect the RJ45 serial port of the 
ConsoleServer directly to the RJ45 serial port of any third-party equipment.  Sun Netra 
servers, Cisco switches, and other similar devices require a special adapter or cable to connect 
to the ConsoleServer.  The adapter or cable is usually provided by the manufacturer of the 
equipment (e.g., Sun), or may need to be created by the user.  The adapters and cables from 
the equipment manufacturer are usually designed to interface directly to a terminal, so the 
ConsoleServer device port must be configured as DTE rather than its default value of DCE.  
Lightwave Communications has pre-made adapters and kits for some common equipment 
types; contact Lightwave for information regarding your specific application. 
 
Note: Some adapters are also available in quantity packs, and may be shipped under a different 
part number.  Quantity packs are "299.xxxx" compared to "200.xxxx".  

 

Device Card typical adapters and 3200 port configuration: 
 
System Type 

Adapter Part Number 

Port Configuration 

SUN 

200.0066 

DCE 

HP, SGI, PC (9pin) 

200.0070 

DCE 

PC (25pin) 

200.0067 

DCE 

Sun Netra t1/Cisco 

200.0225 

DCE 

 

RJ45 to RJ45 Cables: 
 

Part Number 

Length 

200.0062 

2m 

200.0063 

5m 

200.0064 

10m 

200.0065 

15m