Lightwave Communications SCS3230 Manuale Utente

ConsoleServer 3200 System  

 

Lightwave Communications 

Rev. A 

- 72 -  

www.lightwavecom.com 

 
sys admin>>linesperpage 
Lines per page set to 22 
 
sys admin>linesperpage 10 
Lines per page set to 10 
 
sys admin>> 
 

 
The 

LINESPERPAGE command allows the sys admin to change the number of lines displayed 

per terminal page on the control card port before the 

MORE prompt is displayed.  The number of 

lines to display per page is entered after the command.  Entering the command without a 
number following will display the current number of lines displayed per page.  The default value 
is 22, which will work properly with a 24-line display. 
 

 
sys admin>>TIMEOUT 
Timeout set to 1 minutes 
 
sys admin>>TIMEOUT 0 
Timeout set to 0 minutes 
0 disables the timeout from occurring 
 
sys admin>>TIMEOUT 5 
Timeout set to 5 minutes 
 
sys admin>> 
 

 
The 

TIMEOUT command allows the sys admin to define a time limit on how long an idle sys 

admin terminal may remain logged in.  If there is no interaction for the defined amount of time, 
the control card will log out the sys admin.  The time limit in minutes is entered as a command 
qualifier after the command, and must be entered as a whole number.  Defining the time limit as 
0 will disable this function.  The default value is one minute. 

 

 
The sys admin has four commands available to forcibly break user connections to 
devices.  The commands 

BREAK and FORCELOGOUT allow the sys admin to break any 

connection on demand, while 

TELNETTIMEOUT and MODEMTIMEOUT automatically 

break idle user sessions for the network or modem card.