Lightwave Communications SCS3230 Manuale Utente

ConsoleServer 3200 System  

 

Lightwave Communications 

Rev. A 

- 82 -  

www.lightwavecom.com 

When this prompt is displayed, the user is in monitor mode.  There is no direct communication 
between the user and the server.  Any output from the server is saved to a buffer that may be 
accessed by the user (see Section 7.11, Using the Buffer), but the user may issue no 
commands to the server.  If the user desires to issue commands to the server, they must enter 
direct mode (see Section 7.10, Direct Mode). 
 
Note that when selecting a server from a pull-down menu, only those device ports that are 
installed shall be displayed. 
 

 
F2 PULL-DOWN MENU TO LISTEN TO A DEVICE PORT PART 1 

 
                        +--------------------------+ 
                        ¦      LOGGED IN MENU      ¦ 
                        +--------------------------¦ 
                        ¦  CONNECT TO SERVER       ¦ 
                        ¦  DIR CONNECT TO SERVER   ¦ 
                        ¦  LISTEN TO SERVER        ¦ 
                        ¦  DISPLAY CONNECTED LIST  ¦ 

                        ¦  DISPLAY SERVER NAMES    ¦ 
                        ¦  DISPLAY ACTIVE DEVICES  ¦ 
                        ¦  LOGOUT                  ¦ 
                        ¦  CHANGE PASSWORD         ¦ 
                        ¦  CHANGE DIRECT MODE ESC  ¦ 
                        ¦  CHANGE BREAK MODE ESC   ¦ 
                        ¦  DISPLAY HELP            ¦ 
                        +--------------------------+