Ingenico iCT250 Manuale Utente
Page 4
External Cables
DO NOT use any other external cables and/or cable lengths (must be less than 3 metres long) other
than those specified and/or supplied by the manufacturer. Ensure all cables are routed to prevent
damage or accidental contact.
than those specified and/or supplied by the manufacturer. Ensure all cables are routed to prevent
damage or accidental contact.
MODEM
General Description
The Terminal has an integral modem that allows the Terminal to transfer transaction data to card
companies host computer systems.
The Terminal has an integral modem that allows the Terminal to transfer transaction data to card
companies host computer systems.
The internal modem supports: CCITT V22bis/V22/V21/V32, V32bis, V34 data transfer protocols.
It has an automatic dialling facility.
It has an automatic dialling facility.
Disclaimer
This equipment has been designed for connection to the local Public Switched Telephone Network
(PSTN). The apparatus must not be subjected to any modification, in any material way, unless
authorised by Ingenico. Nor must it be used with:
This equipment has been designed for connection to the local Public Switched Telephone Network
(PSTN). The apparatus must not be subjected to any modification, in any material way, unless
authorised by Ingenico. Nor must it be used with:
Internal Modem Software that has not been formally accepted by the manufacturer. External control
Software or external control equipment which causes operation of the modem or associated call
set-up equipment to contravene the requirements of the PSTN Network.
Software or external control equipment which causes operation of the modem or associated call
set-up equipment to contravene the requirements of the PSTN Network.
Systems to which the Modem may be connected
This Modem is only approved for connection to the following telecommunications systems:
This Modem is only approved for connection to the following telecommunications systems:
1. The Public Switched Telephone Network (PSTN).
2. Any equivalent service run by any Licensed Telecommunications Network Operator.
3. Private Branch Exchange (PBX) extensions, being a Branch Telecommunications System operating
under a license.
4. The Modem is not suitable for shared service or 1+1 carrier systems nor as an extension to a
2. Any equivalent service run by any Licensed Telecommunications Network Operator.
3. Private Branch Exchange (PBX) extensions, being a Branch Telecommunications System operating
under a license.
4. The Modem is not suitable for shared service or 1+1 carrier systems nor as an extension to a
payphone.
PLEASE NOTE: It cannot be guaranteed that the Modem will operate correctly under all possible
conditions of connection to PBX’s. Any cases of difficulty should be referred in the first instance to
Ingenico.
conditions of connection to PBX’s. Any cases of difficulty should be referred in the first instance to
Ingenico.
Connection
The modem is connected to the PSTN via a standard plug and flexible cord, which requires a suitable
compatible socket (and adaptor if required).
The modem is connected to the PSTN via a standard plug and flexible cord, which requires a suitable
compatible socket (and adaptor if required).
Terminals connected to phone lines where a broadband service is present must be connected
through an ADSL microfilter.
through an ADSL microfilter.
Dialling
This modem is suitable only for connection to direct exchange and/or PBX lines which provide Dual
Tone Multi Frequency (DTMF) dialling facilities.
This modem is suitable only for connection to direct exchange and/or PBX lines which provide Dual
Tone Multi Frequency (DTMF) dialling facilities.
Ringer Equivalence Number (REN)
To determine the total number of items of apparatus that should be connected simultaneously to
an exclusive PSTN line, the total REN values of each of the items of apparatus connected to the line
should not exceed the maximum REN value 4.0. This value includes any Network operator provided
instrument, each of which is assumed to have a REN value of 1.0 unless otherwise marked.
To determine the total number of items of apparatus that should be connected simultaneously to
an exclusive PSTN line, the total REN values of each of the items of apparatus connected to the line
should not exceed the maximum REN value 4.0. This value includes any Network operator provided
instrument, each of which is assumed to have a REN value of 1.0 unless otherwise marked.