IBM Partner Pavilion Vitrual Switch Extension BMD00082 Manuale Utente
SmartConnect User’s Guide
56
Chapter 4: Stacking
BMD00082, February 2009
2.
Verify that the software push is complete. Use either the CLI or the BBI:
From the BBI, go to Information > Stack and view the Image Push Status Information at
the bottom of the page, or
the bottom of the page, or
From the CLI, use following CLI command to verify the software push:
/info/stack/pushstat
3.
Reboot all switches in the stack. From the BBI, select System Settings > Boot Man-
agement. Click Reboot Stack.
agement. Click Reboot Stack.
4.
Once the switches in the stack have rebooted, verify that all of them are using the same
version of firmware. Using the BBI, open Information > Stack and view the Switch
Firmware Versions Information.
version of firmware. Using the BBI, open Information > Stack and view the Switch
Firmware Versions Information.
Image 1 transfer status info:
Switch 00:16:60:f9:33:00:
last receive successful
Switch 00:17:ef:c3:fb:00:
not received - file not sent or transfer in progress
Image 2 transfer status info:
Switch 00:16:60:f9:33:00:
last receive successful
Switch 00:17:ef:c3:fb:00:
last receive successful
Boot image transfer status info:
Switch 00:16:60:f9:33:00:
last receive successful
Switch 00:17:ef:c3:fb:00:
last receive successful
Config file transfer status info:
Switch 00:16:60:f9:33:00:
last receive successful
Switch 00:17:ef:c3:fb:00:
last receive successful