Hood J3250M Manuale Utente
Accessing Hub Features
Configuring Your Device
Configuring Your Device
If the device you selected is not manageable by browser, you can only
manage it from the management workstation.
manage it from the management workstation.
A
cce
ssin
g
Hub Fea
ture
s
Figure 6-2. 10Base-T Hub-12M Device View
You can enable and disable individual ports (click on the port to select it), or
click on the Select All Ports button to enable or disable all the ports of a
device in one step.
click on the Select All Ports button to enable or disable all the ports of a
device in one step.
For the switching hub, select a hub or card from the stack using the drop
down list at the top. The Closeup View for that hub or card will display.
down list at the top. The Closeup View for that hub or card will display.
To move selected ports to a particular segment:
1. Select the Move Selected Ports to Segment button.
2. Select a hub from the drop down list, then select the segment that you
want to move the port to.
3. Click on Apply Settings.
Click on the link “meaning behind the port icons” to view the port indicator
legend.
legend.
Configuration - Fault Detection
The automatic fault detection feature protects your network from failing
because of problems such as network loops, defective cables, transceivers
because of problems such as network loops, defective cables, transceivers
6-6