Hood J3250M Manuale Utente

Pagina di 104
A
cce
ssin
g
 Hub Fea
ture
Accessing Hub Features 
Configuring Your Device 
Configuring IP 
Select the way that you want IP addresses configured for your network: 
■ 
Manual - Set the IP address through the console. 
Disabled - IP is disabled, there is no access to management or telnet. Not 
Recommended
■ 
Use Bootp - The Bootp protocol sets the IP address automatically. 
Hub IP Configuration 
If you select Manual, you must then enter an IP Address, Subnet Mask, 
Default Gateway, and Time to Live for the device. If you select Bootp/DHCP, 
the IP address will be assigned automatically. 
Switching Hub IP Configuration 
For the switching hubs, you must select a segment to configure before you 
select Manual or Bootp/DHCP. If you select Manual, you must then enter an 
IP Address, Subnet Mask, Default Gateway, and Time to Live for the device. 
If you select Bootp/DHCP, the IP address will be assigned automatically. 
Characteristics of Bootp and DCHP. 
The Bootp protocol is designed for 
a network in which each host has a permanent network connection. It is not 
adaptable to a mobile computing environment. 
The Dynamic Host Configuration Protocol (DHCP) manages the allocation 
of TCP/IP configuration information by automatically assigning IP 
addresses.When a device connects to the network, it requests an address 
from the DHCP server. In dynamic mode, the address is used by the device 
for a specified period of time. The time period depends on the situation; one 
device may only need the address for an hour, while another device may use 
the same address for several days. DHCP is more suitable in environments 
where the number of IP addresses needed exceeds the number available. It 
also allows a device to obtain its configuration information, such as the IP 
Address and Subnet Mask, in one message, reducing the demand on the 
network. 
A static IP address is a unique address that is assigned to one client only. 
Static addresses are used for an extended time period. 
6-8